中文 英文

24hour hotline

+86-15064467521

INFORMATION DETAILS

INFORMATION DETAILS

Back >Home> INFORMATION DETAILS

+86-15064467521

TEL

+86-15064467521

Weifang Luyang waterproof material Co., Ltd

ADDRESS:Industrial Park, Taitou Town, Shouguang City

CONTACT
Polyethylene polypropylene waterproof membrane

Polyethylene polypropylene waterproof membrane

产品介绍  LF115-150系列聚乙烯丙纶多层高分子复合防水卷材是在充分研究现有防水、防渗类产品的基础上根据我国现代防水工程对防水、防渗材料的新要求研制而成的。该产品是选用多层高分子合成片状材料,采

信息详情


Product introduction

Lf115-150 series polyethylene polypropylene fiber multilayer polymer composite waterproofing membrane is developed on the basis of fully studying the existing waterproof and anti-seepage products and according to the new requirements of modern waterproof engineering for waterproof and anti-seepage materials. The product is a new type of waterproof material, which is made of multi-layer polymer composite sheet material and processed with new technology and new technology. Product execution: GB 18173.1-2006

Product features

The product is composed of different materials, and the performance of the product has been significantly improved. In particular, the product is equipped with an anti-aging layer, which greatly improves the service life of the product, reaching more than 50 years.

The upper and lower surfaces of the product are rough. The non-woven fiber is of irregular cross structure, forming a three-dimensional mesh, which makes it have high tensile strength, strong impermeability, good low-temperature flexibility, small expansion coefficient, low temperature rise effect, strong deformation adaptability and large friction coefficient. It can be used with a variety of adhesives and has good bonding effect.

The cement paste can be used as the bonding agent when the product is bonded with the cement base surface. The cement paste can directly enter the mesh on the surface of the coiled material. With the cement solidification, the cement paste has no aging, mildew, hydrolysis and other problems, so the bonding is permanent and firm, and it is not suitable to peel off.

The surface of waterproof layer constructed with this product can be directly used for decoration (such as pasting ceramic tile, floor tile, mosaic, plastering water slurry, etc.).

There is no special requirement for the water content of the leveling layer (base) when the product is used. The construction can be carried out as long as there is no water, and the construction quality is reliable.

The product is a kind of non-toxic and pollution-free green environmental protection product.

product mix

Lf115-150 series polyethylene polypropylene fiber multilayer polymer composite waterproofing membrane is mainly made of non-woven fabric and polyethylene as the main raw materials and additives to improve the performance. It is a composite waterproof material with four layers of sheet materials including reinforced protective layer, anti-aging layer, waterproof layer and tackifying and strengthening layer.

1496979982727702


Polyethylene polypropylene waterproof membrane

详情信息


Product introduction

Lf115-150 series polyethylene polypropylene fiber multilayer polymer composite waterproofing membrane is developed on the basis of fully studying the existing waterproof and anti-seepage products and according to the new requirements of modern waterproof engineering for waterproof and anti-seepage materials. The product is a new type of waterproof material, which is made of multi-layer polymer composite sheet material and processed with new technology and new technology. Product execution: GB 18173.1-2006

Product features

The product is composed of different materials, and the performance of the product has been significantly improved. In particular, the product is equipped with an anti-aging layer, which greatly improves the service life of the product, reaching more than 50 years.

The upper and lower surfaces of the product are rough. The non-woven fiber is of irregular cross structure, forming a three-dimensional mesh, which makes it have high tensile strength, strong impermeability, good low-temperature flexibility, small expansion coefficient, low temperature rise effect, strong deformation adaptability and large friction coefficient. It can be used with a variety of adhesives and has good bonding effect.

The cement paste can be used as the bonding agent when the product is bonded with the cement base surface. The cement paste can directly enter the mesh on the surface of the coiled material. With the cement solidification, the cement paste has no aging, mildew, hydrolysis and other problems, so the bonding is permanent and firm, and it is not suitable to peel off.

The surface of waterproof layer constructed with this product can be directly used for decoration (such as pasting ceramic tile, floor tile, mosaic, plastering water slurry, etc.).

There is no special requirement for the water content of the leveling layer (base) when the product is used. The construction can be carried out as long as there is no water, and the construction quality is reliable.

The product is a kind of non-toxic and pollution-free green environmental protection product.

product mix

Lf115-150 series polyethylene polypropylene fiber multilayer polymer composite waterproofing membrane is mainly made of non-woven fabric and polyethylene as the main raw materials and additives to improve the performance. It is a composite waterproof material with four layers of sheet materials including reinforced protective layer, anti-aging layer, waterproof layer and tackifying and strengthening layer.

1496979982727702


Polyethylene polypropylene waterproof membrane 2020-12-2 本文被阅读 1144 次

+86-15064467521

National free service hotline: 400-658-0378

Contact person: Manager Cui mobile phone: 17863686802

website: www.jinluyang.com

Address: Industrial Park, Taitou Town, Shouguang City


Links:

Phone

+86-15064467521

TOP